You will need a mitre saw, cordless drill, jig saw and an orbital sander
All your cuts will be made on the mitre saw cutting all angles at 15 deg.
Jigsaw to cut out the notch on the two front legs. The 2×6 piece will eventually rest in the notch. Measure 9 1/2 inches up from the bottom of the 2×4 front leg and mark. Measure 1 1/2″ back (depth). Then measure from your nine inch mark up 5 1/2″ and make one more mark. Connect the lines and cut out your notch on both pieces.
Use a roll of tape to mark the rounded corners on the arm rests, the back supports and the front table corners.This improves the looks of this beautiful piece of furniture.
The double bench chair and table can be either painted or finished with an exterior clear coat product such as Min Wax. This will not only protect the bench from the weather but will also bring out a beautiful rich look in the wood.
Fallow the download below for detailed assembly.